Tel:0086-0591-83766293 83766295            Fax: 0086-591-83766292

Address: 901~903, NO.3 building,UNIS SCI-TECH Park, Fuzhou High-Tech Zone,Fujian, China.

Copyright:Alizarin Coating Co., Ltd  |  Copyright - 2018 All Rights Reserved.  闽ICP备ICP18015036/span>  Powered by www.300.cn

 

product

Page view
Product

Eco-solvent Dark Printable PU Flex

Code
HTW-300S
Affiliate classification
没有此类产品
Inquiry
Product description
Features
Steps for usage
banner

Product code: HTW-300S

Product Name: Eco-solvent Dark Printable PU Flex
Specification: 75cm X 30M/Roll
Ink Compatibility: Solvent ink, Eco-Solvent Max ink, Mild Solvent ink etc.
1. Description
     Eco-Solvent Dark Printable PU Flex (HTW-300S) is a Super-Soft PU Flex that can be printed by all kinds of Eco-Solvent inkjet printers with third party inks, Get great durability with image retaining color, wash-after-wash. Decorate fabric with photos in minutes. Innovative hot melt adhesive is suitable to transfer onto textiles like cotton, mixtures of polyester/cotton and polyester/acrylic, Nylon/Spandex etc. by heat press machine. It is ideal for customizing dark, or light colored T-shirts, canvas bags, sport & leisure wear, uniforms, biking wear, promotional articles and more.

 

 

 

 

 

 

Corresponding parameter set not found, please add it in property template of background

2. Advantage

■  Customize fabric with favorite photos and color graphics.
■ 
Designed for vivid results on dark, white or light-colored cotton or cotton/polyester blend fabrics
■  Ideal for personalizing T-shirts, canvas bags, canvas bags, uniforms, photographs on quilts etc.
■ 
Good washable and keep coloration
■  More flexible and more elastic

3. Printer Recommendations

   It can be printed by all kinds of Eco-Solvent inkjet printers such as : Roland Versa CAMM VS300i/540i, VersaStudio BN20, Mimaki JV3-75SP, Uniform SP-750C, and other Eco-solvent inkjet printers etc.


4. Printing setting
 


5. Cutting Setting

6. Heat press transferring

1). Setting a heat press at 165°C for 25 seconds using moderate pressure.
2). Briefly heat the fabric for 5 second to ensure that it is completely smooth.
3). Leave the printed image to dry for approx.5 minutes, cut out the image around the edges. Peel the image line off from the backing         paper gently by adhesive polyester film.
4). Place the image line facing upwards onto the target fabric
5). Place the cotton fabric onto it.
6). After transferring for 25seonds , move away cotton fabric, then cooling for about several minutes, Peel the adhesive polyester film starting at the corner.

7. Washing Instructions:

Wash inside out in COLD WATER. DO NOT USE BLEACH. Place into the dryer or do hang to dry immediately. Please do not stretch the image transferred or the T-shirt as this may cause cracking to occur, If cracking or wrinkling does occur, please place a sheet of greasy proof paper over the transfer and heat press or iron for a few seconds making sure to press firmly over the entire transfer again.
Please remember to not iron directly on the image surface.

8. Finishing Recommendations

Material Handling & Storage: conditions of 35-65% Relative Humidity and at a temperature of 10-30°C.
Storage of open packages: When an open packages of media is not being used
remove the roll or sheets from the printer cover the roll or sheets with a plastic bag to protect it from contaminants, if you are storing it on end, use an end plug and tape down the edge to prevent damage to the edge of the roll do not lay sharp or heavy objects on unprotected rolls and do not stack them. 

暂未实现,敬请期待
暂未实现,敬请期待

Relevant attachments

Please add the data recorded in the website background.
Please add data record on website background.
【Return】