Product Code: HT-150S
Product Name: Eco-solvent Light Printable PU Flex
Specification: 50cm X 30M, 102cm X 30M, 75cm X 30M/Roll, other specifications are requirement.
Ink Compatibility: Solvent ink, Eco-Solvent Max ink, Mild Solvent ink, Mimaki ES3/SS21、BS3/BS4 ink etc.
Operating Video: Operating video of Eco-Solvent Light printable PU Flex (HT-150S)
Eco-Solvent Light Printable PU Flex can be printed by all kinds of Eco-Solvent inkjet printers, get great durability with image retaining color, wash-after-wash. Decorate fabric with photos in minutes. Innovative hot melt adhesive is suitable to transfer onto textiles like cotton, mixtures of polyester/cotton and polyester/acrylic etc. by heat press machine. It is ideal for customizing light, or light colored T-shirts, canvas bags, uniforms , promotional articles and more.
■ Customize fabric with favorite photos and color graphics.
■ Designed for vivid results on white or light-colored cotton or cotton/polyester blend fabrics
■ Ideal for personalizing T-shirts, canvas bags, uniforms, photographs on quilts etc.
■ Good washable and keep coloration
■ More flexible and more elastic
3. Printer Recommendations
It can be printed by all kinds of Eco-Solvent inkjet printers such as : Roland Versa CAMM VS300i/540i, VersaStudio BN20, Mimaki JV3-75SP, Uniform SP-750C, and other Eco-solvent inkjet printers etc.
4. Printing setting
5. Cutting Setting
6. Heat press transferring
1). Setting a heat press at 185°C for 15 seconds using high pressure.
2). Briefly heat the fabric for 5 second to ensure that it is completely smooth.
3). Leave the printed image to dry for approx.15 minutes, cut out the image around the edges.
4). Place the image line facing downwards onto the target fabric
5). After transferring for 15seonds , Peel off the backing paper starting at the corner.
7. Washing Instructions:
Wash inside out in COLD WATER. DO NOT USE BLEACH. Place into the dryer or do hang to dry immediately. Please do not stretch the image transferred or the T-shirt as this may cause cracking to occur, If cracking or wrinkling does occur, please place a sheet of greasy proof paper over the transfer and heat press or iron for a few seconds making sure to press firmly over the entire transfer again. Please remember to not iron directly on the image surface.
8. Finishing Recommendations
Material Handling & Storage: conditions of 35-65% Relative Humidity and at a temperature of 10-30°C.
Storage of open packages: When an open packages of media is not being used remove the roll or sheets from the printer cover the roll or sheets with a plastic bag to protect it from contaminants, if you are storing it on end, use an end plug and tape down the edge to prevent damage to the edge of the roll do not lay sharp or heavy objects on unprotected rolls and do not stack them.